| Engine Options |
Our most popular engines
12hp Kohler, electric/recoil start, 2 stage heavy duty air cleaner
12.75hp Kohler, electric/recoil start, 2 stage heavy duty air cleaner
13hp Honda, electric/recoil start, 2 stage heavy duty air cleaner
20hp Kohler, electric start, Donaldson type air cleaner
25hp Kohler, electric start, Donaldson type air cleaner
30hp Kohler, electric start, Donaldson type air cleaner
Please call for other engine options |
| Engine Oil System |
12hp, 12.75hp and 13hp, low oil pressure shutdown with splash lubrication.
20hp, 25hp and 30hp, low oil pressure shutdown with full pressure lubrication, oil filter and oil cooler. |
| Engine Ignition System |
Electronic - all engines |
| HP @ rpm and Peak Torque @ rpm |
12hp Kohler @ 3600rpm, 18.40 ft/lbs torque @ 2400rpm
12.75hp Kohler @ 3600rpm, 22.60 ft/lbs torque @ 2400rpm
13hp Honda @ 3600rpm, 23.50 ft/lbs torque @ 2500rpm
20hp Kohler @ 3600rpm, 32.62 ft/lbs torque @ 2600rpm
25hp Kohler @ 3600rpm, 39.90 ft/lbs torque @ 2800rpm
30hp Kohler @ 3600rpm, 47.50 ft/lbs torque @ 2400rpm |
| Engine Comp Ratio Displacement Carburation |
12hp Kohler 8.1:1 comp ratio, 21.96 cu in, single-barrel carb
12.75hp Kohler 8.1:1 comp ratio, 21.96 cu in, single-barrel carb
13hp Honda 8.0:1 comp ratio, 23.70 cu in, single-barrel carb
20hp Kohler 8.5:1 comp ratio, 38.00 cu in, single-barrel carb
25hp Kohler 9.0:1 comp ratio, 44.00 cu in, single-barrel carb
30hp Kohler 9.4:1 comp ratio, 45.60 cu in, two-barrel carb |
| Engine Fuel |
Gasoline - all engines |
| Fuel Tank Capacity |
12hp and 12.75hp Kohler, 7.3 quarts
13hp Honda, 6.9 quarts
20hp, 25hp and 30hp Kohler, 3 gallon |
| Two Piece Engine Leveling Wedge |
Reduces down time and operating cost by greatly reducing the need for costly engine replacement due to poor oil circulation.
For more info see 2 Piece Engine leveling Wedge. |
| Cutter Wheel Belt Direct Drive |
Matched to meet engine and cutter wheel drivetrain power requirements.
4 groove cogged Power Band Belt - 12, 12.75, 13, 20, 25 ,30hp |
| Cutter Wheel Drive Clutch (Optional) |
Centrifugal Clutch - Heavy Duty Commercial - 3 groove
Matched to meet engine torque requirements.
.....200 ft/lb Torque - 3 belt drive - 12, 12.75 & 13hp |
| Cutter Wheel Drive Belt Clutch Drive |
Matched to meet engine, clutch and cutter wheel drive train power requirements. .....3 groove cogged Power Band Belt - 12, 12.75 & 13hp |
| Cutter Wheel Belt Tensioner |
Self Adjusting spring loaded belt tensioner gives you full transfer of power to the cutter wheel, improves performance and reduces maintenance.
For more info see Self Adjusting Spring Loaded Belt Tensioner. |
| Cutter Wheel |
14" diameter, 3/8" thick, 16" cutting diameter |
| Cutter Wheel Shaft |
1-1/2" diameter |
| Cutter Wheel Shaft Bearing |
1-3/16" self aligning pillow block |
Cutter Wheel RPM -
Direct Drive |
12hp Kohler - 1591 RPM @ 2400 engine RPM
12.75hp Kohler - 1591 RPM @ 2400 engine RPM
13hp Honda - 1657 RPM @ 2500 engine RPM
20hp Kohler - 1724 RPM @ 2600 engine RPM
25hp Kohler - 1856 RPM @ 2800 engine RPM
30hp Kohler - 1591 RPM @ 2400 engine RPM |
Cutter Wheel RPM -
Clutch Drive |
12hp Kohler - 1566 RPM @ 2400 engine RPM
12.75hp Kohler - 1566 RPM @ 2400 engine RPM
13hp Honda - 1632 RPM @ 2500 engine RPM |
| Teeth Type |
Green Teeth 700 series.
.....3-Teeth-In-1
.....change in seconds
.....no gauging
.....loosen the tooth not the pocket
For more info see 3-Teeth-In-1-Change in Seconds-Green Teeth |
| Teeth Number |
Your choice:
.....an eight tooth cutter wheel that cuts fast like a ripping saw.
.....or a twelve tooth cutter wheel that will cut slower like a finishing saw. |
| Brake |
For more information see Dual Brakes. |
| Brake Type |
Drum and Band |
| Brake Engagement |
Individual hand operated brake levers conveniently located on the left and right side of the handle bar engages and disengages the brake. |
| Brake Bracket |
1/4" angle iron machined. For more information see Heavy Duty Brake System. |
| Brake System |
Posi-lock gives more control and requires less pressure. |
| Axles |
For more information see Heavy Duty Axle Supports. |
| *Tires - SGN Non Towable |
18-6.50x8 turf tires with two precision ball bearings each makes this the easiest to operate push stump grinder. |
| *Tires - SGT Towable |
4.80X8 High Speed trailer tires with automotive wheel bearings. |
| Long Handle Bar Arms |
The BeeLine Stump Grinder is easier to operate because you have more leverage with its longer handle bar arms. For more information see Longer Handle Bar Arms |
| 8 Position Handle Bar Adjustment |
BeeLine has an 8 position handle bar adjustment for operator safety. The operator has more selections to adjust the height to meet his requirements. For more information see 8 Position Handle Bar Adjustment |
| Dual Emergency Shut Down |
The operator has two ways to shut down the unit in the event of an emergency: …..the operator presence bow
…..emergency stop switch. |
| Operator Presence Bow |
For operator safety the engine will automatically shut down when the operator removes his/her hands from the operator presence bow. |
| Emergency Stop Switch |
The push/pull switch is another operator safety feature that shuts down the engine when pushed "IN" in an emergency. |
| Chip Containment |
The channel frame and chip deflectors contain the chips under the machine greatly reducing the chance of injury to the operator, customer and his property. |
| Frame |
7ga hot rolled channel frame |
| *Frame - SGN Non Towable |
This model is Non Towable and does not have a tow bar receiver. |
| *Frame - SGT Towable |
This model is towable and the Tow bar receiver is an integral part of the frame.
For more information see Tow Bar Receiver is an integral part of the frame. |
| Height and Length of Stump Grinder |
| Handle Bar Position |
Height |
Length |
| 8th Top Position |
65.00 |
73.25 |
| 7th |
61.93 |
80.62 |
| 6th |
57.75 |
86.25 |
| 5th |
52.37 |
91.75 |
| 4th |
45.87 |
95.25 |
| 3rd |
38.62 |
97.37 |
| 2nd |
30.50 |
98.25 |
| 1st Lowest Position |
22.25 |
99.00 |
|
| Height to top of Engine |
12hp and 12.75hp Kohler - 36.75
13hp Honda - 36.08
20hp and 25hp Kohler - 45.45
30hp Kohler - 46.75 |
*Width - SGN
Non Towable |
29.5" |
*Width - SGT
Non Towable |
31.5" |
| Weight |
12hp and 12.75hp Kohler - 325lbs
13hp Honda - 325lbs
20hp and 25hp Kohler - 405lbs
30hp Kohler - 415lbs |
| Cutting Depth |
18" below ground |
| Cutting Height |
22.5" above ground |
| Cutting Diameter |
no limitations. I have taken out stumps I could park my pick up truck in the hole. |
| Manual Pack and Manuals |
Each machine comes with two manuals. One stays with the stump grinder in the plastic manual pack on the handle bar. The other can be filed in the office. |
| Battery |
Totally sealed, vibration resistant, no liquid, no corrosion, 12V, 34AH, 475CCA |
| Paint |
E-Coated and Powder Coated to protect against rust and corrosion. |
| Bi-Lingual English/Spanish Safety Decals |
Standard on all BeeLine Stump Grinders.
For more information see Bi-Lingual English/Spanish Decals |
)
)
)
)