| Engine
Gauges |
Tachometer/maintenance hour meter is standard on all self propelled models and is located on the easy to view control panel. |
| Engine
Options |
Our most popular
engines
12hp Kohler, electric/recoil start, 2 stage heavy duty air cleaner
12.75hp Kohler, electric/recoil start, 2 stage heavy
duty air cleaner
13hp Honda, electric/recoil start, 2 stage heavy duty
air cleaner
20hp Kohler, electric start, Donaldson type air cleaner
25hp Kohler, electric start, Donaldson type air cleaner
30hp Kohler, electric start, Donaldson type air cleaner
Please call for other engine options |
| Engine
Oil System |
12hp, 12.75hp and 13hp, low oil pressure shutdown with splash lubrication.
20hp, 25hp and 30hp, low oil pressure shutdown with full pressure lubrication, oil filter and oil cooler. |
| Engine Ignition System |
Electronic - all engines |
| HP @ rpm and Peak Torque @ rpm |
12hp Kohler @ 3600rpm, 18.40 ft/lbs torque @ 2400rpm
12.75hp Kohler @ 3600rpm, 22.60 ft/lbs torque @ 2400rpm
13hp Honda @ 3600rpm, 23.50 ft/lbs torque @ 2500rpm
20hp Kohler @ 3600rpm, 32.62 ft/lbs torque @ 2600rpm
25hp Kohler @ 3600rpm, 39.90 ft/lbs torque @ 2800rpm
30hp Kohler @ 3600rpm, 47.50 ft/lbs torque @ 2400rpm
|
| Engine Comp Ratio Displacement Carburation |
12hp Kohler 8.1:1 comp ratio, 21.96 cu in, single-barrel carb
12.75hp Kohler 8.1:1 comp ratio, 21.96 cu in, single-barrel carb
13hp Honda 8.0:1 comp ratio, 23.70 cu in, single-barrel carb
20hp Kohler 8.5:1 comp ratio, 38.00 cu in, single-barrel carb
25hp Kohler 9.0:1 comp ratio, 44.00 cu in, single-barrel carb
30hp Kohler 9.4:1 comp ratio, 45.60 cu in, two-barrel carb |
| Engine Fuel |
Gasoline - all engines |
| Fuel Tank Capacity |
12hp and 12.75hp Kohler, 7.3 quarts
13hp Honda, 6.9 quarts
20hp, 25hp and 30hp Kohler, 3 gallon |
| Two Piece Engine Leveling Wedge |
Reduces down time and operating cost by greatly reducing the need for costly engine replacement due to poor oil circulation.
For more info see 2 Piece Engine Wedge. |
| Clutch |
Electric Clutch
with Brake
Matched to meet engine torque requirements
200 ft/lb Torque - 3 groove - 12hp, 12.75hp & 13hp
250 ft/lb Torque - 3 groove - 20 & 25hp
300 ft/lb Torque - 4 groove - 30hp |
| Clutch Safety |
Engine will not start if clutch is engaged. |
| Cutter
Wheel Belt |
Matched to meet
engine, clutch and cutter wheel drive train power
requirements
3 groove cogged Power Band Belt - 12 to 25hp
4 groove cogged Power Band Belt - 30hp |
| Cutter
Wheel Belt Tensioner |
Self Adjusting spring loaded belt tensioner gives you full transfer of power to the cutter wheel, improves performance and reduces maintenance.
For more info see Self Adjusting Spring Loaded Belt Tensioner. |
| Cutter
Wheel |
14" diameter, 3/8"
thick, 16" cutting diameter |
| Cutter
Wheel Shaft |
1-1/2" diameter |
| Cutter
Wheel Shaft Bearing |
1-3/16" self aligning
pillow block |
| Cutter
Wheel RPM |
12hp Kohler - 1525 RPM @ 2400 engine RPM
12.75hp Kohler - 1525 RPM @ 2400 engine RPM
13hp Honda - 1589 RPM @ 2500 engine RPM
20hp Kohler - 1568 RPM @ 2600 engine RPM
25hp Kohler - 1689 RPM @ 2800 engine RPM
30hp Kohler - 1647 RPM @ 2400 engine RPM |
| Teeth |
Green Teeth 700 series.
.....3-Teeth-In-1
.....change in seconds
.....no gauging
.....loosen the tooth not the pocket
For more info see 3-Teeth-In-1-Change in Seconds-Green Teeth |
| Teeth Number |
Your choice:
.....an eight tooth cutter wheel that cuts fast like a ripping saw.
.....or a twelve tooth cutter wheel that will cut slower like a finishing saw. |
| Cutting
Range |
No limitations to the
diameter of the stump
24" above ground to 18" below
ground |
| Drive
Train to Tires |
1 piece Integrated Hydrostatic Transaxle
Standard Features
.....Internal oil filtration system
....."Sealed for life" no oil change required
.....Variable speed control
.....Automatic return to neutral
.....Positive locking by-pass lever
.....Automatic return to off disc brake |
| Drive
Train Belt |
Kevlar "A" for longer life and minimum stretch |
| Drive
Train Tensioner |
Easily adjustable
constant spring tensioned |
| Drive Train Control |
Easy Finger-Tip forward/reverse control panel at the handle bar loop allows the operator to keep both hands on the handle bar while increasing or decrease speed or changing directions. |
| Control Dampener |
Gives a more controlled, softer, safer, stop. |
| Drive
Train Brake |
Conveniently located
hand operated brake lever engages the disc brake which
is an integral part of the 1 piece hydrostat and does
not require a spring |
| Tires |
Aggressive 16-6.50x8 Snow Hog Tires for better traction in dirt and chips. These wide tires will stay on top of the chips instead of sinking in. |
| Long Handle Bar Arms |
The BeeLine Stump Grinder is easier to operate because you have more leverage with its longer handle bar arms.
For more information see Longer Handle Bar Arms |
| 8 Position Handle Bar Adjustment |
BeeLine has an 8 position handle bar adjustment for operator safety. The operator has more selections to adjust the height to meet his requirements.
For more information see 8 Position Handle Bar Adjustment |
| Control Panel |
The control panel is raised slightly so the operator can easily and safely reach over (not through) the handle bar loop. |
| Dual Emergency Shut Down |
Besides the key switch the operator has two additional ways to shut down the unit in the event of an emergency: the operator presence bow and emergency stop switch. |
| Operator Presence Bow |
For operator safety the engine will automatically shut down when the operator removes his/her hands from the operator presence bow. |
| Emergency Stop Switch |
The push/pull switch is another operator safety feature, that is easy to see and reach, that shuts down the engine when pushed "IN" in an emergency. |
| Chip Containment |
The channel frame and chip deflectors contain the chips under the machine greatly reducing the chance of injury to the operator, customer and his property. |
| Frame |
7ga hot rolled channel frame |
| Height and Length of Stump Grinder |
| Handle Bar Position |
Height |
Length |
| 8th Top Position |
65.00 |
73.25 |
| 7th |
61.93 |
80.62 |
| 6th |
57.75 |
86.25 |
| 5th |
52.37 |
91.75 |
| 4th |
45.87 |
95.25 |
| 3rd |
38.62 |
97.37 |
| 2nd |
30.50 |
98.25 |
| 1st Lowest Position |
22.25 |
99.00 |
|
| Height to top of Engine |
12hp and 12.75hp Kohler - 36.75
13hp Honda - 36.08
20hp and 25hp Kohler - 45.45
30hp Kohler - 46.75 |
| Width |
30.5" |
| Weight |
12hp and 12.75hp Kohler - 445lbs
13hp Honda - 445lbs
20hp and 25hp Kohler - 489lbs
30hp Kohler - 510lbs |
| Cutting Depth |
18" below ground |
| Cutting Height |
22.5" above ground |
| Cutting Diameter |
no limitations. I have taken out stumps I could park my pick up truck in the hole. |
| Manual Pack and Manuals |
Each machine comes with two manuals. One stays with the stump grinder in the plastic manual pack on the handle bar. The other can be filed in the office. |
| Battery |
Totally sealed, vibration resistant, no liquid, no corrosion, 12V, 34AH, 475CCA |
| Paint |
E-Coated and Powder Coated to protect against rust and corrosion. |
| Bi-Lingual English/Spanish Safety Decals |
Standard on all BeeLine Stump Grinders.
For more information see Bi-Lingual English/Spanish Decals |
)
)
)